Loudest Ford Transit Van 12K Audio Upgrade

October 27, 2021

Ford Transit Van Audio Upgrade – Alpine Halo 9 inch Touchscreen – XFIRE Audio components – Focal | B&B Audioconcepts Cardiff

 

Loudest Ford Transit Van 12K Audio Upgrade

This really must be a UK first as B&B Audioconcepts keep a close eye on the industry and not heard anyone else who had done this, so now the technical bit of what was achieved, Audioconcepts Team removed sync 3 and added an Alpine Halo in a new 2021 Ford Transit and not only that but managed to  keep all relevant features intact and functional.

It truly has been manic at B&B Audioconcepts this week, as well as the pre-booked weeks worth of work, the Team also had to fit a huge 12k audio build , which came in on a Monday and had to be completed in a matter of days.  B&B Audioconcepts will always step up to the challenge and as a result a few late nights had to be grafted in but they did it , not least of all thanks to:
The dedicated B&B Audioconcepts staff ,Jacco Kaper the amazing custom box designer, Saul Boogie for the amazing carpentry skills, Chris Bennett from XFIRE for the tuning. This is probably the loudest vehicle we have built in the last 10 years, and boy do the ears hurt.  Customer wanted two systems, one for family use and the second for all out bass.

What B&B Audioconcepts Team installed:

  • Alpine halo 9” screen
  • Custom made fitting kit
  • Custom made steering controls
  • Rear camera conversion
  • Focal k2power speakers
  • Focal flax speakers
  • Focal 8” subwoofer for system 1
  • Xfire 4 ch amplifier
  • Xfire mono amplifier for system 1
  • Xfire monster mono for 1+2 subs
  • Xfire monster mono for 3+4 subs
  • Xfire 15” subwoofers x 4
  • Xfire dsp
  • Custom box
  • Boxes of skinz soundproofing
  • Connection cables

Alpine Halo9 : Android Auto and CarPlay

The HALO9 has a beautiful 9-inch WVGA touchscreen which only uses an adjustable mount attached to a 1-DIN chassis for installation. The default position has the screen’s sliding mount pushed out with it sitting at a 90-degree angle. The bottom of the screen is then centred with the 1-DIN chassis. The screen hovers over or in front of the dash and consumers have the option to position it 20mm deep and up to 30mm higher (or lower) than the default position. The hovering position gives the deck a clean and modern silhouette. The screen can be tilted between four pre-set angle points (45º, 20º, 0º, -20º).

ENTERTAINMENT

The HALO9 comes equipped with Apple Car Play and Android Auto for seamless, hands-free incorporation of the most popular mobile phone technologies. The deck also has an HD Radio tuner built-in.  Maps, music, messages, and phone calls are controlled from and displayed on the HALO9’s touchscreen.

The system is also compatible with Bluetooth technology for audio streaming and hands-free calling features. A USB port is included with the HALO9’s cable bundle for connected video or audio playback, an AUX input, and HDMI input. The HAL09 has a mech-less design, which means that there is no CD/DVD slot, but one can be added with a player that is sold separately.

In addition to the standard Apple Car Play and Android Auto apps, there are a few popular apps such as Waze, Spotify, and Amazon Music that are accessible through the Alpine Unit. You have the ability to customise the shortcuts that appear on your touchscreen so that you can have your most popular audio sources and phone settings available at a simple touch.

MAIN FEATURES

9-inch WVGA capacitive touchscreen
Audio, video and Bluetooth® feature set
Works with Apple CarPlay®
Android Auto™ now with the Google Assistant
HD Radio™ tuner built-in
Made for iPod® and iPhone®
Pandora control from iPhone® and Android™ smartphones
FLAC/MP3/WMA/AAC/HE-AAC music playback via USB
Alpine TuneIt® App integration
BT Plus Bluetooth® wireless technology with audio streaming
My Favorites feature provides custom shortcuts to favorite audio sources, places and phone numbers
Touch screen control of electrical accessories via KAC-001 External Accessory Control Module (sold separately)
4-way swipe action graphical interface control
Touch screen control of multiple camera systems via KCX-C2600B Multi-Camera Selector Interface (sold separately
One HDMI input

 

XFIRE EFX 3000D Amplifier

Sleek, Stylish, Aggressive! The result of XFIRE AUDIO’s commitment to design and build sleek, elegant, yet seriously powerful amplifiers able to fit into any audio application with ease. With their stunning cosmetic design, LED backlit XFIRE logo combined with outstanding technologies like Full Range Class D we’ve raised the bar on audio amplification and done it with style. EFX Series Amplifiers are sleek and modern but don?t be fooled by their sophisticated allure, these powerhouses crank out a deadly punch in knockout fashion. No filler, 100% killer. Are you ready to rock?

Features:

  • Ultra efficient Mono Block Class-D topology design with 5 volt inputs and 2 ohm stability
  • Extensive customisation controls like LP/Subsonic crossovers make it easy to design the perfect soundstage
  • Small, sleek, blacked-out all aluminium chassis
  • “Direct Device Mount” PCB’s and tight tolerance components for improved signal to noise ratios for superior musical reproduction from the very first note
  • Input and output connectors direct PCB mounted ensuring maximum power and signal transfer while side panel secured terminals resist flex, twist or breakage for structural integrity and performance
  • ISOTEK protects against thermal overload, low voltage and short circuits
  • XFIRE EFX-K1 bass remote included

 

XFIRE EFX-1204D AMPLIFIER

Features:

  • Ultra efficient 4-channel full range Class-D topology design with 5 volt inputs and 2 ohm stability
  • Extensive customisation controls like HP/LP/BP crossovers make it easy to design the perfect soundstage
  • Switchable RCA inputs, except low and high level signals
  • Auto sensing for high level inputs, auto turn on/off for seamless integration with OEM systems
  • Audio output and remote output for daisy chaining amplifiers
  • Small, sleek, blacked-out all aluminium chassis
  • “Direct Device Mount” PCB’s and tight tolerance components for improved signal to noise ratios for superior musical reproduction from the very first note
  • Input and output connectors direct PCB mounted ensuring maximum power and signal transfer while side panel secured terminals resist flex, twist or breakage for structural integrity and performance
  • ISOTEK protects against thermal overload, low voltage and short circuits

XFIRE XFR-151 SUBWOOFER

XFR Series Subwoofers were born to be kick-ass high end audio subwoofers for those who work hard and play hard demanding the utmost in power and performance.

XFR Series Subwoofers adopt significant design characteristics from our XMF and XFR ?Decimator? Series Subwoofers delivering up to 3000 Watts of max power handling.

Features:

  • Die cast “Dura-Frame” black powder basket with “Direct Coil Cooling”
  • 160 ounce double stacked ferrite motor structure
  • Machined T-yokes with blacked out back plate
  • US made 3″ 4-layer copper voice coil
  • Ultra lightweight black carbon fiber cone with “Preceision Linear Drive” dual stitched resin fiber surround
  • “Dual Core” progressive conex spider assembly with industrial woven dual tinsel leads
  • XFIRE molded motor cover
  • XFIRE secure seal gasket
  • Compression fit terminals

 

Focal K2 Power Speakers

The car audio kit ES 165 K is composed of two 6,5″ (165 mm) woofers and two 025/32″ (20mm) TKM tweeters. This is a compact solution that’s easy to install. The K2 Power Kevlar® cones used for the speaker drivers of the ES 165 K component kit deliver extremely dynamic sound and perfect definition. These cones endowed with all the ideal qualities, lightness, rigidity and excellent damping, have also been given the new TMD suspension. Initially developed for Sopra high-fidelity loudspeakers, the exclusive design of the suspension removes unwanted resonances and reduces the effects of distortion.

The two TKM inverted dome tweeters are composed of aramid fibres. Their exclusive “M”-shaped profile is designed to control deformation of the dome, and to perfectly reproduce high frequencies up to 22 kHz smoothly and with precision. Their compact crossovers are quick to install and easy to set up. Various accessories are supplied for assembling the tweeters, which can be installed in the factory locations, on tilting frames or flush-mounted.
The kit is supplied with aluminium and mesh grilles.

Focal Precision and Dynamics

The speaker drivers used for the K2Power have been completely redesigned. Each component is the result of extensive research in acoustics to push back the limits of performance, of power and of precision! The K2Power Kevlar® cone, a product of unique expertise Made In Focal, is to this day second to none. Composed of an ultra-light foam structure sandwiched between a thin layer of Kevlar® aramid fibres, and a layer of glass fibres, the K2Power cone combines three key factors of quality acoustics: Rigidity, Lightness and Damping, for precise and dynamic sound.

Say Goodbye To Distortion

The new K2 Power TKM tweeter features an exclusive “M”-shaped structure. This new-generation aramid-fibre inverted dome tweeter provides great precision in the very high end, and its combination with a “push-pull” motor with IAL2 technology extends the low end of the frequency response and provides extraordinary harmonic balance

An Optimised Crossover

The components used for the new K2 Power crossovers were selected specifically and optimised in order to improve control over the effects of heat dissipation. These components, which are fundamental to managing the various channels and for the soundstage, are now even more reliable.

 

Focal Flax Evo Speakers

Treat your car audio installation to powerful sound thanks to the PC 165, a coaxial speaker driver kit with 61/2″ (16.5cm) woofers. The tweeters can be orientated for even greater listening comfort. The woofer, with its Polyglass cone, will surround you in warm sound without colouration.

The speaker driver with integrated crossover makes installation easier. Connect your kit with great ease and enjoy the extreme sensations of listening to Performance speaker drivers. Create your sound with ease.

For thirty years, French experts have been innovating to bring you the best technologies to increase listening comfort. Focal soon became the reference in the car audio sector as well as in the high-end market. The Performance line was designed so you can create your ideal system: powerful, precise and high- fidelity.

What makes the difference:

  • Partial horn loading tweeter
  • High sensitivity
  • High soundstage
  • Dynamics and neutrality

 

Who are B&B Audioconcepts?

So we are B&B (BIG BASS) Audioconcepts, we are specialists in Vehicle Customising, Vehicle Modifying and Vehicle Upgrading anything that moves, whether on land or sea. We are accredited with our Car Audio Industry’s top affiliations, and you can be confident that your vehicle is in the best possible hands. B&B Audioconcepts has a professional team of staff who are highly experienced in carrying out Car Audio and Car Security installations for all types of vehicles. Each member is highly skilled in carrying out the Installation Services we offer to a very high standard to ensure that each customer gets the best out of their new installation(s). B&B Audioconcepts offer full vehicle customisation from, Vehicle Wrapping, Engine Tuning, Window Tinting, Bodykit Fitting, Alloy Wheel Refurbishment. Get in touch for more details to see how we can take your vehicle / motorbike / boat / yacht to the next level.